Machines
Baling, cutting & shredding machines built for heavy use
Every machine is manufactured in-house and backed by installation, spares, and AMC support.
Browse by category
Featured machines
Triple Action Baling Press Machine
- NSG TAP-150 — 150 Ton pressing force
- NSG TAP-250 — 250 Ton pressing force
- NSG TAP-400 — 400 Ton pressing force
Heavy-duty triple-action hydraulic press that compacts metal scrap, turnings, and structural offcuts into dense, easy-to-handle bales in a single automatic cycle.
View details
Double Action Baling Press Machine
- NSG DAP-100 — 100 Ton pressing force
- NSG DAP-200 — 200 Ton pressing force
- NSG DAP-350 — 350 Ton pressing force
Twin-cylinder hydraulic baler that compresses and ejects loose scrap and light-gauge material into stackable bales, built for high-throughput yards.
View details.webp&w=3840&q=75)
TMT Bar Cutting Machine
- NSG TMC-16 — Up to 16mm dia
- NSG TMC-25 — Up to 25mm dia
- NSG TMC-32 — Up to 32mm dia
Hydraulic shearing machine engineered to cleanly cut hot or cold TMT/rebar to length at rolling mill line speeds.
View detailsIndustrial Scrap Cutting Machine
- NSG ISC-300 — 300mm cutting capacity
- NSG ISC-400 — 400mm cutting capacity
- NSG ISC-500 — 500mm cutting capacity
Heavy hydraulic alligator/guillotine shear built to cut structural steel, pipes, and bulky scrap sections down to furnace-charge size.
View detailsPET Bottle Baling Press Machine
- NSG PBP-30 — 30 Ton pressing force
- NSG PBP-60 — 60 Ton pressing force
- NSG PBP-100 — 100 Ton pressing force
High-cycle hydraulic baler that compresses PET bottles, plastic film, and other light recyclables into dense, strap-ready bales.
View detailsCarton Scrap Baling Press Machine
- NSG CBP-40 — 40 Ton pressing force
- NSG CBP-80 — 80 Ton pressing force
- NSG CBP-120 — 120 Ton pressing force
Hydraulic baler purpose-built for cardboard, carton, and paper waste, producing dense bales that hold shape through storage and transport.
View detailsShredder Machine
- NSG SHR-30 — 1 - 3 Ton/hr
- NSG SHR-75 — 3 - 7 Ton/hr
- NSG SHR-150 — 7 - 15 Ton/hr
Rugged single or double-shaft shredder that reduces scrap metal, tyres, plastic, and e-waste to a uniform, processable size.
View details
Cotton Waste Baling Press Machine
- NSG CWP-25 — 25 Ton pressing force
- NSG CWP-50 — 50 Ton pressing force
- NSG CWP-80 — 80 Ton pressing force
Hydraulic baler built for cotton waste, textile fibre, and ginning by-products, forming stable bales from bulky, low-density fibrous material.
View detailsHydraulic Alligator Scrap Shear Machine
- NSG HAS-120 — 120 Ton cutting force
- NSG HAS-180 — 180 Ton cutting force
- NSG HAS-250 — 250 Ton cutting force
Hydraulic alligator-jaw shear that bites through structural sections, pipe, and rod scrap in a single clamping stroke.
View details
Heavy Duty Hydraulic Scrap Shear Machine
- NSG HDS-300 — 300 Ton cutting force
- NSG HDS-400 — 400 Ton cutting force
- NSG HDS-500 — 500 Ton cutting force
High-tonnage hydraulic shear built for thick structural sections, plate offcuts and dense mixed scrap that lighter shears can't handle.
View details
Mechanical Alligator Scrap Shear Machine
- NSG MAS-60 — 60mm round bar cutting
- NSG MAS-90 — 90mm round bar cutting
- NSG MAS-120 — 120mm round bar cutting
Flywheel-driven mechanical alligator shear that delivers fast, repetitive cuts on light-to-medium scrap without a hydraulic power pack.
View details
Heavy Duty Mechanical Alligator Scrap Shear Machine
- NSG HMS-150 — 150mm round bar / light section cutting
- NSG HMS-180 — 180mm round bar / light section cutting
Reinforced mechanical alligator shear scaled up for medium structural sections while keeping the fast cycle time of a flywheel drive.
View details
Semi-Automatic Horizontal Hydraulic Baler Machine
- NSG SHB-80 — 80 Ton pressing force
- NSG SHB-150 — 150 Ton pressing force
- NSG SHB-220 — 220 Ton pressing force
Operator-fed horizontal baler with a manually latched chamber door, built for yards that want hydraulic pressing without full automation cost.
View details
Horizontal Hydraulic Baling Press Machine
- NSG HBP-100 — 100 Ton pressing force
- NSG HBP-200 — 200 Ton pressing force
- NSG HBP-350 — 350 Ton pressing force
Fully automatic horizontal baling press with PLC-controlled auto-door and cycle sequencing for continuous, high-throughput operation.
View details
Double Compression Hydraulic Scrap Baler Machine
- NSG DCB-150 — 150 Ton total pressing force
- NSG DCB-250 — 250 Ton total pressing force
- NSG DCB-350 — 350 Ton total pressing force
Twin-stage compression baler that pre-compacts then final-presses scrap for denser bales than a single-stage press of the same tonnage.
View details
Heavy Duty Horizontal Hydraulic Scrap Baler Machine
- NSG HHB-250 — 250 Ton pressing force
- NSG HHB-400 — 400 Ton pressing force
- NSG HHB-600 — 600 Ton pressing force
Reinforced horizontal scrap baler built with heavier cylinders and frame for continuous high-tonnage, multi-shift baling.
View details
Vertical Hydraulic Baling Press Machine (Downstroke Type)
- NSG VDB-15 — 15 Ton pressing force
- NSG VDB-25 — 25 Ton pressing force
- NSG VDB-40 — 40 Ton pressing force
Compact downstroke vertical baler that presses material straight down into a floor-mounted chamber, suited to small footprints.
View details
Triple Compression Hydraulic Scrap Baler Machine
- NSG TCB-200 — 200 Ton total pressing force
- NSG TCB-350 — 350 Ton total pressing force
- NSG TCB-500 — 500 Ton total pressing force
Three-stage compression baler that maximises bale density for scrap, giving the highest weight-to-volume ratio in our baler range.
View details
Heavy Duty Triple Compression Hydraulic Baler Machine
- NSG HTC-400 — 400 Ton total pressing force
- NSG HTC-600 — 600 Ton total pressing force
- NSG HTC-800 — 800 Ton total pressing force
High-tonnage triple compression baler scaled up for large scrap yards running continuous export-grade bale production.
View details
Vertical Hydraulic Baling Press Machine
- NSG VBP-20 — 20 Ton pressing force
- NSG VBP-35 — 35 Ton pressing force
- NSG VBP-50 — 50 Ton pressing force
Upstroke vertical baler that presses material upward into a top-mounted chamber, a compact standard for small-to-mid volume balers.
View detailsAutomatic Vertical Hydraulic Baling Press Machine
- NSG AVB-30 — 30 Ton pressing force
- NSG AVB-50 — 50 Ton pressing force
- NSG AVB-75 — 75 Ton pressing force
PLC-controlled vertical baler with automatic door and ejection sequencing for continuous conveyor-fed operation.
View details
Double Box Hydraulic Baling Press Machine
- NSG DBB-60 — 60 Ton pressing force per box
- NSG DBB-100 — 100 Ton pressing force per box
- NSG DBB-150 — 150 Ton pressing force per box
Twin-chamber baler that runs two independent pressing boxes off one power pack, doubling throughput without doubling floor space.
View details
Twin Chamber Hydraulic Baling Press Machine
- NSG TCH-50 — 50 Ton pressing force per chamber
- NSG TCH-80 — 80 Ton pressing force per chamber
- NSG TCH-120 — 120 Ton pressing force per chamber
Side-by-side twin-chamber baler sharing a single hydraulic circuit, built for continuous alternating-cycle production.
View details
Horizontal Hydraulic Scrap Baler Machine
- NSG HSB-80 — 80 Ton pressing force
- NSG HSB-130 — 130 Ton pressing force
- NSG HSB-200 — 200 Ton pressing force
General-purpose horizontal scrap baler sized for aluminium cans, light ferrous scrap and mixed metal streams at yard scale.
View details
Hydraulic Metal Briquetting Press Machine (Briquette Press)
- NSG BQP-45 — 45 Ton pressing force
- NSG BQP-80 — 80 Ton pressing force
- NSG BQP-120 — 120 Ton pressing force
Vertical hydraulic press that compacts loose metal turnings and swarf into dense, uniform briquettes for easier handling and remelting.
View details.webp&w=3840&q=75)
Horizontal Hydraulic Baling Press Machine (Semi-Automatic Type)
- NSG HBS-100 — 100 Ton pressing force
- NSG HBS-200 — 200 Ton pressing force
- NSG HBS-300 — 300 Ton pressing force
Mid-range horizontal baling press with a manually latched door, sitting between our compact semi-automatic baler and the full PLC auto-door line.
View details
Trusted by partners across industry
- Vantage Steel
- Northbridge Energy
- Corewell Systems
- Atlas Fabrication
- Meridian Power
- Ironclad Logistics
- Vantage Steel
- Northbridge Energy
- Corewell Systems
- Atlas Fabrication
- Meridian Power
- Ironclad Logistics